BSP 6.0 Components List

From WIKI SECO

Introduction

  • Below you will find the BSP 6.0 components list & it's link to download the source code for Kernel,U-Boot,File-system & from Yocto guideline and Toolchain.


Tag Name Access Link
KERNEL Linux 4.1.15 GIT git clone https://git.seco.com/arm/nxp/imx6/bsp6/release/linux-4-1-15-secoboards-imx6-rel.git

git clone https://git.seco.com/arm/nxp/imx6/bsp6/release/linux-4-1-15-secoboards-imx6sx-rel.git for B08

BOOTLOADER U-Boot 2015.04 GIT git clone https://git.seco.com/arm/nxp/imx6/bsp6/release/u-boot-2015-04-secoboards-imx6-rel.git

git clone https://git.seco.com/arm/nxp/imx6/bsp6/release/u-boot-2015-04-secoboards-imx6sx-rel.git for B08

FILESYSTEM X11 based QT5
HTTP ftp://git.seco.com/arm/nxp/imx6/BSP6/FILESYSTEM/fsl-image-qt5-rootfs-4.1.15-1.2.0-x11-v1.0.tar.gz
X11 based QT5 for SECO-B08 HTTP ftp://git.seco.com/arm/nxp/imx6/BSP6/FILESYSTEM/seco-B08-image-qt5-rootfs-4.1.15-1.2.0-x11-v1.0.tar.gz
Xwayland based QT5 HTTP ftp://git.seco.com/arm/nxp/imx6/BSP6/FILESYSTEM/fsl-image-qt5-rootfs-4.1.15-1.2.0-xwayland-v1.0.tar.gz
Fb based QT5 HTTP ftp://git.seco.com/arm/nxp/imx6/BSP6/FILESYSTEM/fsl-image-qt5-rootfs-4.1.15-1.2.0-fb-v1.0.tar.gz
TOOLCHAIN Linaro GNUEABI 5.2 HTTP ftp://git.seco.com/arm/nxp/imx6/BSP6/TOOLCHAIN/iMX6_arm-fsl-linaro-gnueabi-5.2.tar.gz
TOOL Flashing SD HTTP ftp://git.seco.com/arm/nxp/imx6/BSP6/flashing_script_6.0.sh.tar.gz
BINARIES Kernel HTTP ftp://git.seco.com/arm/nxp/imx6/BSP6/KERNEL/kernel-4.1.15.tar.gz
Kernel HTTP ftp://git.seco.com/arm/nxp/imx6/BSP6/KERNEL/kernel-B08-4.1.15.tar.gz
U-Boot HTTP HW configuration dependent,select one at ftp://git.seco.com/arm/nxp/imx6/BSP6/U-BOOT/

File-System Sources

Currently SECO supports Yocto file-system For BSP 6.0 for i.MX 6 boards and we are providing precompiled file system for BSP 6.0 in Filesystems

  • Yocto-Filesystem Builder

Yocto-Filesystem Builder

The Yocto is the filesystem builder it creates minimal and desktop environment.The user who needs filesystem customization So follow the page at Yocto Build Guidline 2.0.

Toolchain

The above toolchain contain tools like Debugger or a Compiler for a specific programming language, such as C,C++.All the programs run on a host system of a specific architecture (such as x86) but produce binary code (executable) to run on a different architecture (e.g. ARM). This is called Cross Compilation.
Note: The toolchain is used for x86_64 bit architecture Host system.