BSP 7.0 Components List

From WIKI SECO

Introduction

  • Below you will find the BSP 7.0 components list & it's link to download the source code for Kernel,U-Boot,File-system & from Yocto guideline and Toolchain.


Tag Name Access Link
KERNEL Linux 4.9-88 GIT git clone https://git.seco.com/arm/nxp/imx6/bsp7/release/linux-4-9-secoboards-imx6-rel.git
BOOTLOADER U-Boot 2017.03 GIT git clone https://git.seco.com/arm/nxp/imx6/bsp7/release/u-boot-2017-03-secoboards-imx6-rel.git
FILESYSTEM* Fb based QT5 HTTP http://imx6-binary.seco.com/bsp7/FILESYSTEM/fsl-image-qt5-imx6qsabresd-20181113110709.rootfs.tar.bz2
TOOLCHAIN Poky Linux Gnueabi HTTP http://imx6-binary.seco.com/bsp7/TOOLCHIAN/fsl-imx-xwayland-glibc-x86_64-core-image-base-cortexa9hf-neon-toolchain-4.9.88-2.0.0.sh
BINARIES Kernel HTTP http://imx6-binary.seco.com/bsp7/KERNEL/kernel-4-9-88.tar.gz
U-Boot HTTP HW configuration dependent,select one at http://imx6-binary.seco.com/bsp7/U-BOOT/
  • *File system is temporary as of now, We will update the SECO one soon.

File-System Sources

Currently SECO supports Yocto file-system For BSP 7.0 for i.MX 6 boards and we are providing precompiled file system for BSP 7.0 in Work in Progress

  • Yocto-Filesystem Builder

Yocto-Filesystem Builder

The Yocto is the filesystem builder it creates minimal and desktop environment.The user who needs filesystem customization So follow the page at Yocto Build Guidline BSP7.

Toolchain

The above toolchain contain tools like Debugger or a Compiler for a specific programming language, such as C,C++.All the programs run on a host system of a specific architecture (such as x86) but produce binary code (executable) to run on a different architecture (e.g. ARM). This is called Cross Compilation.
Note: The toolchain is used for x86_64 bit architecture Host system.