Getting a Custom BSP 6.0

From WIKI SECO

Introduction

The followings steps will guide you in compiling U-Boot and Kernel 4.1.15.
This will allow you to deeply customize your System.
If you don't want to compile both Kernel and U-Boot, you can also download the U-Boot and/or Kernel precompiled version here .
If you don't need to customize your installation and you want to start in a fastest way, please take a look at Create a Bootable SD using Precompiled Images 6.0.

Before continuing, please note that these steps will works only for iMX 6 BSP 6.0

Getting the last U-Boot Release

First of all, you need to download the source from the SECO's Git repository.

https://git.seco.com/arm/nxp/imx6/bsp6/release/u-boot-2015-04-secoboards-imx6-rel.git

For download SECO-B08 source from SECO's Git repository.

https://git.seco.com/arm/nxp/imx6/bsp6/release/u-boot-2015-04-secoboards-imx6sx-rel.git

You are now ready to manually compile the U-Boot. Please follow the instructions at U-Boot 2015.04 Compilation

If you don't want to compile the U-Boot yourself, download the pre-compiled version here .

Getting the last Kernel 4.1.15 Release

First of all, you need to download the source from the SECO's Git repository.

https://git.seco.com/arm/nxp/imx6/bsp6/release/linux-4-1-15-secoboards-imx6-rel.git

For downlaod SECO-B08 source from the SECO's Git repository.

https://git.seco.com/arm/nxp/imx6/bsp6/release/linux-4-1-15-secoboards-imx6sx-rel.git

You are now ready to manually compile the Kernel 4.1.15. Please follow the instructions at BSP 6.0 Compiling Kernel 4.1.15

If you don't want to compile the Kernel yourself, you can download the precompiled version here .

Getting a Filesystem

To get the file system kindly refer to the Yocto Build Guidline 2.0

If you want available File System provided by SECO can be found here .