Qseven Carrier Boards

From WIKI SECO

Qseven Carrier Boards

This section provides an overview of the SECO’s Qseven carrier boards available for the i.MX6 modules. This section is just a brief about the technical specification and the connector placements on the board. It will help you to have a primary evaluation on which carrier board will suit your requirements in the best way possible. please refer to the Carrier board’s specific manuals available on https://www.seco.com for more detailed information about hardware.

Qseven carrier boards are intended for the use with any Qseven® CPU module. Qseven ® is a form factor designed to minimize space consumption, since it integrates in only 70x70mm of space all core components of a common PC architecture (CPU, RAM, Graphic, audio, etc.). All the functionalities are made available through a standardized card edge connector, from which all signals can be taken and carried to the appropriate external connector in the carrier board and/or to other internal component, to implement more functionalities other than included in the standard Qseven ® bus interface. The connection to the Qseven ® board is implemented through a standardized MXM connector, which is a proven high speed signal interface connector. The board has been specifically designed for taking advantage of all possible features that can be offered by x86 and/or ARM architectures on Qseven ® modules. To learn more about Qseven® standard: http://www.qseven-standard.org. The Qseven Carrier Boards are